Filter
Top Products
3-8
Chapter 3
Cajun P550/P880/P882 Switch User Guide
Setting Recurring Summer Time Hours Using the CLI
To set recurring Summer Time Hours using the CLI, enter the
following command from Configure mode:
> (configure) clock summer-time recurring <week>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Day Select the day of the week when you want recurring
Summer Time Hours to start or end. Options are based
on a seven-day week and include:
• Sunday - the default Start and End values. In
the Western hemisphere, DST starts on the first
Sunday in April and ends on the last Sunday in
October.
• Monday
• Tuesday
• Wednesday
• Thursday
• Friday
• Saturday
Month Select the month when recurring Summer Time
Hours start or end. The twelve months of the
Gregorian calendar are provided.
For recurring Summer Time Hours, the default Start
value is April, the month during which DST starts in
the Western hemisphere. The default End value is
October, the month during which DST ends in the
Western hemisphere.
Hour Enter a value to represent the hour when Summer
Time Hours start or end for Recurring settings.
For Recurring Summer Time Hours, the default value
is 02, meaning 2:00 a.m., for both Start and End
hours.
Minutes Enter a value to represent the number of minutes into
the hour when Summer Time Hours start or end for
Recurring Summer Time Hours. The default value is
00 for both Start and End minutes.
Table 3-1. Recurring Summer Time Hours Parameters continued
Parameter Definition