Filter
Top Products
7-6
Chapter 7
Cajun P550/P880/P882 Switch User Guide
Replacing an Element
If an element fails, you are notified by:
■ A console message
■ An event log message
■ An error message that displays in the Switch Elements field
on the Web Agent Switch Status window:
# Failed <number>
where <number> is the number that indicates the failed element.
To replace an element:
1. Select Switch Fabric from the System> Configuration group
on the web agent window. The Switch Fabric Status dialog
box opens (Figure 7-4).
Figure 7-4. Switch Fabric Status Dialog Box
2. Select No from the Configure Redundant Hardware
field pull-down menu.
3. Select APPLY to disable the failed element.