Filter
Top Products
9-26
Chapter 9
Cajun P550/P880/P882 Switch User Guide
Creating IP
Static ARP
Entries Using
the CLI
To create IP static ARP entries using the CLI, enter the following
command in Configure mode:
Cajun(configure)# arp <ip-address> <hardware-
address>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Creating a BOOTP/DHCP Server Entry
The BOOTP/DHCP Server Entry allows you to configure a Cajun
Router as a BOOTP/DHCP Relay Agent between a BOOTP/DHCP
server and the source client. Only the locally attached clients will be
able to find the BOOTP/DHCP server if the BOOTP/DHCP server
entry is configured on your switch. If you have a network with
multiple switches, and you want at least one client that is attached
to each switch to be able to access the BOOTP/DHCP server, then
you must configure each of those switches with a BOOTP/DHCP
server entry.
You can create a BOOTP/DHCP Server entry using wither the web
agent or the CLI.
Creating a
BOOTP/DHCP
Server Entry
Using the Web
Agent
To create a BOOTP/DHCP entry using the web agent:
1. Select BOOTP/DHCP Servers from the Routing > IP >
Configuration group on the web agent window. The IP
BOOTP/DHCP Servers dialog box opens (seeFigure9-11).
Figure 9-11. IP BOOTP/DHCP Server Dialog Box
2. Select CREATE. The Add BOOTP/DHCP Server Entry dialog
box opens (Figure 9-14).