Filter
Top Products
9-70
Chapter 9
Cajun P550/P880/P882 Switch User Guide
Enabling VRRP
on an Interface
Using the Web
Agent
To enable an VRRP on an interface using the CLI, enter the
following command in Configure mode:
>(configure)# ip vrrp <vr-id> address <ip-address>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Creating a VRRP Virtual Router
You can create a VRRP router using either the web agent or the CLI.
Creating a VRRP
Virtual Router
Router Using
the Web Agent
To create a VRRP router from the web agent:
1. Select VRRP from the Routing > IP > Configuration group on
the web agent window. The VRRP Virtual Routers dialog box
opens (Figure9-32).
Figure 9-32. VRRP Virtual Routers Dialog Box
2. Select CREATE. The Add VRRP Virtual Router dialog box
opens (Figure9-33).