Filter
Top Products
9-76
Chapter 9
Cajun P550/P880/P882 Switch User Guide
4. Select Enable from the IRDP State pull-down menu.
5. Select Multicast from the Adv. Address pull-down menu.
6. Delete the default value in the Min. Advertisement Interval
(sec.) field and enter the minimum time interval that passes
before the host contacts the switch.
7. Delete the default value in the Max. Advertisement Interval
(sec.) field and enter the maximum time interval that passes
before the host contacts the switch.
8. Delete the default value in the Advertisement Life Time (sec.)
field, and enter a duration, in seconds, of the IRDP
advertisement.
9. Click APPLY to save your changes, or CANCEL to restore
previous settings.
10. Select Global Configuration from the Routing > IP >
Configuration group on the web agent window. The IP Global
Configuration dialog box opens (see Figure9-30).
11. Select Enable the IP Multicast Forwarding field
pull-down menu.
12. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Max. Advertisement
Interval (sec)
Enter the maximum time (in seconds) allowed between
sending multicast router advertisements sent from the
interface. This value must be no less than four seconds and
no greater than 1800 seconds. The default value is 1800
seconds.
Advertisement Life
Time (sec.)
Enter the time (in seconds) of the life of a router
advertisement that is sent from the interface. This value
must be no less than the maximum advertisement interval
and no greater than 9000 seconds. The default value is
three times the maximum advertisement interval.
Table 9-33. ICMP Router Discovery Protocol Dialog Box Parameters continued
Parameter Allows You to ...