Filter
Top Products
9-78
Chapter 9
Cajun P550/P880/P882 Switch User Guide
Configuring LDAP Settings
You can configure LDAP settings from either the web agent or the
CLI.
Configuring
LDAP Settings
from the Web
Agent
To configure LDAP settings from the web agent:
1. Select LDAP Configuration from the Routing > IP >
Configuration group on the web agent. The LDAP
Configuration dialog box opens (Figure9-36).
Figure 9-36. LDAP Configuration Dialog Box
2. Refer to Table9-34 to configure the LDAP Configuration
dialog box parameters.
Table 9-34. LDAP Configuration Dialog Box Parameters
Parameter Allows You To ...
Primary Server IP
Address
Enter the IP address of your primary LDAP server for the
access control list domain. This address is used first when
connecting to and downloading access lists from an LDAP
server. The default value of 0.0.0.0 indicates to the client
that there is no primary LDAP server.
Primary Server Port
Enter the port number of the primary LDAP server for
the access control list domain. The port number is used in
conjunction with the primary server IP address. There are
no special overload values. The default port is 389.