Filter
Top Products
Cajun P550/P880/P882 Switch Configuration Guide
Configuring AppleTalk Routing
15-13
Deleting an AppleTalk Static Route
You can delete an AppleTalk static route using either the web agent
or the CLI.
Deleting an
AppleTalk Static
Route Using the
Web Agent
To delete an AppleTalk static route using the web agent:
1. Select Static Route from the Routing > AppleTalk >
Configuration group on the web agent window. The
AppleTalk Interfaces dialog box opens (Figure15-5).
2. Select the checkbox next to the AppleTalk static route that
you want to delete from the Select column.
3. Click DELETE to remove the AppleTalk static route.
Deleting an
AppleTalk Static
Route Using the
CLI
To delete an AppleTalk static route using the CLI, enter the following
command in Configure mode:
> (config if-<interface-name>:)# no appletalk
static
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Creating an AppleTalk Name-Binding Protocol (NBP) Filter
The NBP performs a conversion from named AppleTalk entities to
their AppleTalk protocol addresses. Multiple names can exist for the
same entity (alias). NBP also performs:
■ Name registration
■ Name deletion
■ Name lookup
■ Name confirmation
NBP allows you to bind a name to the internal storage address for
your entity and register this mapping so that other entities can look
it up. You can display NBP names to users and use addresses
internally to locate entities. When you register your entity’s name
and address pair, NBP validates its uniqueness.
You can create an NBP using either the web agent or the CLI.