Filter
Top Products
2-4
Chapter 2
Cajun P550/P880/P882 Switch User Guide
Contains software developed by:
Epilogue Technology Corporation
Copyright (c) 1988 - 1996 Epilogue Technology Corporation
TEC Technically Elite Concepts, Inc.,
Copyright (c) 1994 by Technically Elite Concepts, Inc.,
Hermosa Beach, California, U.S.A.
ISI Integrated Systems, Inc.
Copyright 1991 - 1995, Integrated Systems, Inc.
All other trademarks used herein are the property of their
respective owners.
Lucent Technologies Cajun Switch Agent v4.0.0
Press Ctrl-P for previous command, Ctrl-N for next command,?
for help.
Login:
* Note: Login information and Password prompts are case
sensitive.
4. Enter root at the Login prompt. The password prompt
displays.
5. Enter root at the Password prompt. The command line
interface prompt displays. You must now change he
command mode to the configure mode so that you can use
the setup command.
6. Complete the following steps to change the command mode
to the configure mode:
a. Enter the enable command.
b. Enter the configure command.
7. Enter the setup command. This initiates a series of queries.
Answer each query as follows:
a. Press Enter when prompted to change the super user
password. This accepts the default of Yes
b. Enter your old password. The system then prompts you
for a new password.
c. Enter your new password, then re-enter the new
password to verify your choice.
d. Enter the IP address for the switch manager’s Ethernet
console.
e. Enter the subnet mask.
f. Enter the default gateway for the switch.