Avenview FO-DVI-1080LC-Set Network Router User Manual


 
www.avenview.com
4
1.2 Safety Instructions
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview FO-DVI-1080LC Series with fiber optic cable system lets you extend digital flat panel signal up to
1000 meters (3260 feet).
- High Speed and long distance transmission by LC type Multi-Mode fiber
- Use standard DVI Plug and LC Fiber connector
- R, G, B, Clock signal is transmitted separately by Multi-Mode optical Fiber
- Supports up to WUXGA (1920 x 1200) resolution
- Self detecting function for EDID
- Optional external power supply (Automatic Power switch is included)
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
- Transmitter x 1 pc
- Receiver x1 pc
- Power Adapter (5VDC, 1.2A)
- User’s Manual