Filter
Top Products
AXIS 243Q Blade Installation Guide Page 9
ENGLISH
ENGLISH
Resetting to the Factory Default Settings
This will reset all the parameters in all 4 units (including all four IP addresses) to the factory
default settings.
1. Disconnect power.
2. Press and hold the Control button and reconnect power.
3. Release the button when the
Status Indicator displays red
(which may take up to 15
seconds). When the Status
Indicator changes to Green
(which may take up to 1
minute), the process is
complete and the unit 4 has
been reset.
4. Re-assign the IP addresses,
using one of the methods
described in this document.
To reset an individual unit to the original factory default settings, use the button provided in
that unit’s web interface. For more information, please see the online help.
Further information
The user’s manual is available from the Axis Web site at www.axis.com or from the Axis
Network Video Product CD supplied with this product.
Control button
LED Indicators
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your
AXIS 243Q Blade. To see the currently installed firmware version, see the Basic
Configuration web page in the product’s Setup tools.