Filter
Top Products
Instruction 24-9450 3
IrDA Printer Description
Figure 1. Component Locations and Functions
ON OFF
Power
Infrared Sensor
Window
Paper
Cover
Battery Cover
(bottom of printer)
FEED Button:
1) With printer already ON,
press to advance paper.
2) Enter Self-Test Mode by
holding down this button
and turning ON the
printer.
3) With printer already in its
Set-Up Mode, press to
change value of printer
parameter as selected by
the SEL button.
Error LED (Red):
Flashes when:
• Out of paper
• Paper cover is open
• Set-up mode is selected
• Buffer is full
• Print head temperature
exceeds 140°F (60°C).
Power LED (Green):
Glows steady when
printer is turned ON.
SEL Button:
1) Enter Set-Up Mode by
holding down this button
and turning ON the
printer.
2) With printer already in its
Set-Up Mode, press to
select printer parameter.
Change value of selected
parameter by pressing the
FEED Button.
Top View of
FEED Button