Filter
Top Products
SureCross™ DX81P6 FlexPower™ Supply Module
Delivers and manages dc voltage from six 3.6V dc lithium primary batteries
Printed in USA 01/08 P/N 131628 rev. B
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Model Power Batteries Cable
DX81P6 3.6V dc Battery Six 3.6V lithium “D” Cells 5-pin Euro Pigtail QD
Models
Features
Wireless solution for powering a FlexPower™ Node and sensor devices
Unique power management system to run the FlexPower Node and a device through
switched power outputs for up to ten years, depending on the power requirements of
the device and required update rates
Six 3.6V dc lithium “D” cell batteries
IP67 sealed enclosure
FlexPower systems allow for a true wireless solution as the Node can be powered by battery
power (3.6 to 5.5V dc). Battery life is application specific. Contact Banner Engineering’s
application engineers for a battery life calculation for your specific application.
For additional information and a complete list of replacement parts, please refer to Banner
Engineering’s website, www.bannerengineering.com/surecross.
•
•
•
•