Filter
Top Products
2604 User Guide
6.3
Symbology
You can enable/disable type of barcode decoders with both the BaracodaManager and the programming
guide.
6.4
Data format
6.4.1
Acknowledgment:
You are given an acknowledgment if the scan is successful.
You can configure or disable the scanner acknowledgement through BaracodaManager.
Acknowledgment is disabled in default settings.
6.4.2
Prefix/suffix
You can add a prefix and/or a suffix to every barcode sent to the host device.
You can configure prefix/suffix through both BaracodaManager and programming guide.
There is no prefix/suffix in default settings
6.4.3
Baracoda Header
It is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:
• to use the Baracoda keyboard emulation (KEmul) and Hyper terminal
• to use the acknowledgment function.
You can configure Baracoda Header through BaracodaManager.
The Baracoda header is enabled in default settings
6.4.4
Ba code Iden ifier r t
The scanner can transmit max. 2-digit barcode identifier code for different types of barcodes (symbologies).
List of 2-digit identifier codes can be found in the programming guide.
You can configure barcode identifier through programming guide.
The barcode identifier is disabled in default settings
6.5
Beeps and LEDs
You can customize types of Beeps/LED Lightening using both BaracodaManager and programming guide.
Default settings are shown in Status Display Summary section of this guide.
© Baracoda 2003 Page 6/8