Barco NH-12 Projector User Manual


 
3. Kit installation (detailed)
How to remove the PMP?
1. Remove the input module (see concerning chapter)
2. Remove both screws xing the PMP to the front plate
Image 3-4
PMP: front xing screws
3. Remove the side screws xing the input boards to the PMP
Image 3-5
4. Disconnect the PMP from the inputs by unplugging the board-to-board connectors
Image 3-6
PMP: unplug from input boards
5. Remove the LVDS connector from the PMP (see chapter LVDS interface )
R59770498 PMP KIT 28/02/2011
9