Filter
Top Products
BARCO 14 Projection Systems
Reset Lamp Run Time.
What has to be
done
The lamp run time has to be reset to zero hours.
Necessary Tools no tools necessary
Reset Lamp Run
Time
To reset the lamp run time, follow the next procedure:
1
2
3
4
5
6
Start up the projector.
Enter the adjustment mode by pushing ENTER.
Select Service mode by pushing the cursor key é or
ê.
Press ENTER to select.
Select Reset Lamp Run time by pushing the cursor
key é or ê.
Press ENTER to select.
A warning appears on the screen. If qualified, press
ENTER. The Reset Run Time menu appears.
Enter the serial number of the new lamp with the
digit keys on the RCU. Start with 0 and continue
with the number written on page 4.
Press ENTER to continue.
Step Action Screen menu
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with é or ê
then <ENTER>
<EXIT> to return.
WARNING
RISK OF
ELECTRICAL SHOCK
RESET LAMP RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
RESET LAMP RUN TIME
Enter the serial number
of the new lamp :
x x x x x x x
<ENTER> to continue
<EXIT> to return.