Filter
Top Products
AC power connection
6-1
5975996 BARCOGRAPHICS 808s 241197
6
AC POWER CONNECTION
AC Power (mains) cord connection
Use the supplied cord to connect your projector to the wall outlet. Plug
the female power connector into the male connector at the back of the
projector.
This projector may be connected to an IT-power system. The IT-
power system is a power distribution system having no direct connec-
tion to earth. Instead, the exposed conductive parts of the electrical
installation are earthed.
POWE R / MAIN S COMM. PORT POR T 3
PORT 4/5
PORT 2
PORT 1
PROJECTOR MODE
POW ER / MAINS
Preparing your power cord
Mains lead (power cord) with CEE7 plug
As the colors of the wires in the mains lead of this apparatus may not
correspond with the colored markings identifying the terminals in your
plug, proceed as follows:
The yellow/green wire is ground and must be connected to the
terminal in the plug which is marked by the letter E or by the safety
earth symbol or colored yellow and green.
The blue wire is neutral and must be connected to the terminal
marked with the letter N or colored black.
The brown wire is the line and must be connected to the terminal
marked with the letter L or colored red.
The wires of the delivered mains lead (power cord) are colored in
accordance with the following code :
Yellow and Green : Ground (Earth).
Blue : Neutral.
Brown : Live.
Power cord with an ANSI 73.11 plug
The wires of the delivered mains lead (power cord) are colored in
accordance with the following code :
Yellow and Green : Ground (Earth).
White : Neutral.
Black : Live.