Filter
Top Products
14. ACSAR Set Ups
4. Repeat the procedure from step 2 for the other password numbers.
5. Press EXIT (RCU) or select item RETURN with selection wheel on ACSAR to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
MORE....
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX
CHANGE PASSWORD
Enter new password
OWNER 0000
USER 0000
GUEST 0000
ACCESS CONTROL LIST
Select with ↑ or ↓
then <ENTER>
Reprogram with ↓,↑,← or →
or numeric keys
<ENTER> to confirm
<EXIT> to return
0HQX
Message
Changed password
completed
<EXIT> to return
0HQX
14.3.3 Filling In the Access Control list
About Access Control List
The access control list allows the OWNER to define the accessible items for the USER and the GUEST for entry with their own
password.
How to fill in the access control list.
1. From the Change Password menu, select item ACCESS CONTROL LIST. (menu 14-9)
The Access Control List menu appears on-screen and in the graphical display. This menu displays the menus and menu items
which can made accessible for the User, the Guest and Everybody. All the items, on which an access right is applicable, can be
seen in the menu by scrolling. (menu 14-10)
2. From the scroll list, successively select the items on which you will change the access rights, e.g. Input balance.
3. Apply the access rights (“Y” on-screen and “+” in graphical display) for an item to User, Guest and Everybody as follow:
- With the Remote Control: successively press ENTER (pressing once, add a “Y” to the next column) until the access rights
are filled in, e.g. Y––––.
- With the selection wheel: successively press wheel (pressing once, add a “+” to the next column) until the access rights are
filled in, e.g. Y + + + +.
4. Press EXIT (RCU) or select item RETURN with selection wheel on ACSAR to return.
CHANGE PASSWORD
Enter new password
OWNER 0000
USER 0000
GUEST 0000
ACCESS CONTROL LIST
Select with ↑ or ↓
then <ENTER>
Reprogram with ↓,↑,← or →
or numeric keys
<ENTER> to confirm
<EXIT> to return
0HQX
ACCESS CONTROL LIST
M
enu O U G E
Adj mode YYYY
BARCO LOGO Y---
Change address YYYY
File Delete Y---
File Del All Y---
Input Balance Y---
Installation Y---
O=owner, U=user, G=Guest
E=everybody
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
0HQX
ACCESS CONTROL LIST
M
enu O U G E
File Delete Y---
File Del All Y---
Input Balance Y---
Input Balance Y---
Random Access YYYY
Serial Commun YYYY
Service YYYY
O=owner, U=user, G=Guest
E=everybody
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
0HQX
14.4 ACSAR Address Change
About Address
The ACSAR can be programmed with two addresses, an unique and a common address.
68
R5976519 ACSAR 12122002