Barco R9842364 Time Clock User Manual


  Open as PDF
of 4
 
1. Installation procedure
1. INSTALLATION PROCEDURE
Before starting the installation procedure, switch off the Solaris LC40 and unplug from the wall outlet.
For a fully implementation, Solaris LC40 must b e equipped with software version 1.08 or higher.
1.1 Removing the actual module or dummy
How to remove
1. Turn out both fixing screws holding the actual installed module or the dummy cover. (image 1-1)
2. Slide out the actual installed module or take away the dummy cover.
2 screws
Image 1-1
1.2 Inserting a new module
How to insert
1. Slide the module into the slot. Insure the module is seated correctly in the guide grooves.
2. Press on both handles of the input module until the module plug seats in the connector of the Solaris LC40.
3. Secure the input module by turning in both removed screws.
4. Reconnect to the wall outlet and start up the Solaris LC40.
R5976727 SDI — HD-SDI INPUT MODULE 30012004 1
 previous