Filter
Top Products
Step 1:
Connect your equipment
Plug your equipment into the eight available sockets.
Please refer to the Safety Information paragraph prior
to connecting the Surge Protector to a mains power
supply..
Step 2:
Connect your peripheral devices
Connect any BT / RJ11* or Coaxial cable enabled device
for added surge protection.
* on Irish model BZ108130ir2M
Step 3:
Organize your cables
Route all power cables through the slots above the plug
sockets. Cables can then be directed through either
side or out of the top of the Surge Protector.
Step 4:
Activate the Surge Protector
Close the Concealing Cover and plug the unit into the
AC wall outlet. Make sure the power switch is in the ON
position.
Introduction
Thank you for purchasing the Belkin Concealed Surge Protector. Each year, frequent natural and
man-made power disturbances corrupt the power supplied to your home and offi ce electronics.
The Concealed Surge Protector provides Belkin’s ‘Extreme’ protection level and an innovative
cable-management solution, providing a great way to organise and conceal your power cords.
Please be sure to read through the Set Up Guide and Safety Information to ensure proper
protection of your connected devices.
Product Features
8 Surge Protected BlockSpace sockets, positioned for maximum connection fl exibility.
Auxiliary Surge Protection through BT / RJ11* and Coaxial cable ports. Providing additional
surge protection for telephone, modem and Home Theatre equipment.
Integrated Cord Management - Molded slots enable multiple cables to be directed through the
top of the unit and neatly marshalled out of the top or side.
Cord and Plug Concealing Cover - Creates an organised and professional look. Acts as a
deterrent against pets, infants and children from accessing the socket connections.
Set Up Guide
Safety Information
CAUTION: Do not overload unit. The total output current of the AC adaptor blocks is not intended
to be more than seven Amps. Large AC adaptor blocks must not be plugged in adjacent to one
another.
It is recommended that AC adaptor blocks are alternated between standard plugs to enable
suffi cient air ventilation between sockets and avoid the risk of over heating, when the concealing
cover is closed.
CAUTION: The on/off switch incorporates a light indicating the presence of live mains at the
surge protector. This is not an indicator of live mains availability at the socket outlets.
To determine the output current of plugged-in devices,
read the device-rating label. This label may be located on
the transformer block plug, on the equipment, or in the
manufacturer’s user manual. Add the
input current rating
of all plugged-in devices to fi nd the total current. If the total
input current of the AC adaptor blocks is greater than 7 Amps,
unplug equipment from the unit.
To prevent any risk of electrical shock, unplug the unit before
cleaning.
Do not “daisy-chain” this product or use it with extension cords. The Belkin Concealed Surge
Protector’s cord must be plugged directly into an AC power source.
Use indoors and in dry locations. Not for use with aquariums or other water-related products.
Step 5:
Mounting instructions (Optional)
Use the two mounting holes on the back of the Surge
Protector to secure it to your wall or baseboard. Install
two screws into your wall or baseboard making sure
that at least 1⁄4 inch of the screw is still exposed. Insert
the screws into the mounting holes of the baseboard
and lock into place.
NOTE: hardware not included.
MODEL NO.: BE123456
INPUT: 100-240V 1.0A 50/60Hz
OUTPUT: 12V 2.6A
Made in China
Device-Rating-Label Example:
BZ108130uk2M_man_uk.indd 2 2/23/2007 4:19:36 PM