Belkin F1DA116T Switch User Manual


 
®
Self Help Guide
TSG-UK-1-001 | www.belkin.com | Page 1 of 1
®
Self Help Guide
IMPORTANT!
This Guide refers to the
following Products:
Pro 2 KVM Firmware Update Instructions
F1DA116T
PS/2 & USB
Synopsis:
Please read the following carefully;
Requirements:
This guide will assist you in updating the firmware
of your Belkin OmniView Pro 2 KVM Switch.
Please be advised that firmware updates tend to
be to resolve specific issues and if there is any
doubt if the firmware will resolve your issue you
should check with Technical Support.
To perform the Firmware Upgrade successfully
you will need the following equipment;
Pro 2 KVM
12 V DC 1A KVM Power Supply (supplied)
RJ45-DB25 Flash Update Cable (supplied)
PC with Windows 2000 or XP and Parallel Port
Firmware Update File
NTPDA Update
You will also need to ensure that any Firewall or
Anti-Virus Software is disabled on the Computer
you will be using to upgrade the Firmware from.
F1DA108T
PS/2 & USB
TSG-UK-2-001 | www.belkin.com | Page 1 of 4
F1DA104T
PS/2 & USB