Filter
Top Products
Introduction | 1
To install the Switch, you will need the following:
Introduction
This Quick Installation Guide will guide you through the steps needed to install
the OmniView PRO3 Dual-User KVM Switch (the Switch).
If you have any problems during this installation, please refer to the User Manual.
VGA Monitor
12V/1A Power
Supply (included with
Schuko and Uk plug
Rack-Mount
Brackets with
Screws (included)
OmniView PRO3
Dual-User KVM
Switch (included)
USB or PS/2 Keyboard
USB or PS/2 Mouse Belkin Dual-Port
Micro-Cable Kit
[Belkin Part No. F1D9400-XX
(PS/2-style) or F1D9401-XX
(USB-style)]