Filter
Top Products
10
Powering Up the Systems
Verify that all computers connected to the E Series KVM Switch are powered on.
If any connected computers have not been powered on, it is okay to do so at this
time (computers can be powered on simultaneously). The E Series KVM Switch
emulates both a mouse and keyboard on each port and allows your computer to
boot normally. Your E Series KVM Switch is ready to use.
The computer connected to Port “1” will be displayed on the monitor. Check
that the keyboard, monitor, and mouse are working normally. Check all occupied
ports to verify that all computers are connected and responding correctly. If you
encounter an error, check your cable connections for that computer and reboot. If
the problem persists, please refer to the “Troubleshooting” section in this
User Manual.
Installation