Filter
Top Products
Belkin OmniView® Secure KVM Switch User CC supplement
1.3 Usage Assumptions
The Common Criteria Evaluated Configuration requires the following assumptions in usage of the
OmniView Secure KVM device. These assumptions should be assured either through facility or
procedural provisions.
• An AUTHORIZED USER possesses the necessary privileges to access the information
transferred by the TOE.
• USERS are AUTHORIZED USERS.
• The TOE meets the appropriate national requirements (in the country where used) for
conducted/radiated electromagnetic emissions. [In the United States, Part 15 of the FCC Rules
for Class B digital devices.]
• Only the selected COMPUTER’S video channel will be visible on the shared MONITOR.
• The TOE is installed and managed in accordance with the manufacturer’s directions.
• The AUTHORIZED USER is non-hostile and follows all usage guidance.
• The TOE is physically secure.
• Vulnerabilities associated with attached DEVICES (SHARED PERIPHERALS or SWITCHED
COMPUTERS), or their CONNECTION to the TOE, are a concern of the application scenario and
not of the TOE.
2. Common Criteria Administrative Guidance - OmniView® Secure KVM Switch User Manual
F1DN102U F1DN104U F1DN108U
The follow section lists the supplemental information relating to a Common Criteria deployment for the
OmniView® Secure KVM Switch User Manual in accordance with AGD_USR.1 & AGD_ADM.1 Common
Criteria Assurance Measure requirements.
Usage Assumptions
Note that the usage assumptions listed in Section 1.3 must be maintained to assure all TOE security
objectives are maintained during usage.
Applicability of OmniView® Secure KVM Switch User Manual to Common Criteria
The OmniView Secure KVM Switch User Manual applies in its entirety to the Common Criteria Evaluated
Configuration.