Filter
Top Products
38
Using Your SMB CAT5 KVM Switch
Using Your SMB CAT5 KVM Switch
Keyboard Hot Key Command Shortcuts
Below is a complete list of hot key commands that can be used for your SMB
CAT5 KVM Switch:
SL, SL, Up Arrow Switch to PREVIOUS ACTIVE port
SL, SL,
Down Arrow
Switch to NEXT ACTIVE port
SL, SL, Page Up Switch to PREVIOUS BANK
(By default, selects first active port on the BANK)
SL, SL,
Page Down
Switch to NEXT BANK
(By default, selects first active port on the BANK)
SL, SL, Y Directly switches to PORT Y on BANK 00
(Single-Switch Configuration) Y=01 to 16
SL, SL, X, Y Directly switches to PORT Y on BANK X
(Daisy-Chain Configuration) (X=00 to 15)
(Y=01 to 04 for F1DA104T)
(X=00 to 15) (Y=01 to 08 for F1DA108T)
(X=00 to 15) (Y=01 to 16 for F1DA116T)
SL, SL, Space Bar,
F10
Monitor DDC2 (identifies monitor settings)
SL, SL, Space Bar Activate On-Screen Display
SL, SL, F4 Enable AutoScan mode (refer to AutoScan button)
NOTE: You will have approximately five seconds to complete each hot
key sequence.