Filter
Top Products
23
1
2
3
4
5
6
7
8
section
Firmware-Upgrade Guide
The file upload is finished when the progress bar runs through 100 percent
and a prompt tells you that the upgrade is OK.
Click “OK”. The firmware-upgrade process is complete.
Step 9.
Finally, unplug the power cable from the back of the KVM Switch and all
other cables from the KVM Switch, and perform a cold reset. Reconnect all
the cables again to the KVM Switch.
Nowyoucanenjoythenewlyaddedfunctionalityandcompatibilityofthe
new firmware version.
Note: After you have finished the firmware-upgrade process, try the port
switching and other functionalities of the KVM Switch to see whether it
works fine with the new firmware. If it does, then this upgrade process was
successfully completed. Congratulations!
If the file-upload process encounters an error and cannot complete
successfully, please refer to the “Firmware-Upgrade Troubleshooting” section.