Filter
Top Products
EN-2
EN-3
Hardware Installation
General instructions for installing the card are provided below. Since the
design of system may vary, refer to your system’s reference manual for
further information, if needed.
1. Power off your notebook computer.
2. Insert the USB 2.0 NOTEBOOK CARD into the Type II PC Card slot of your
notebook computer. Make sure it is inserted all the way in for a solid
connection.
3. Power on your notebook computer.
Driver Installation
For Windows® 2000/XP/Server 2003/Vista
Windows® 2000, XP, Server 2003 and Vista will automatically detect and
install the correct driver for the USB 2.0 NOTEBOOK CARD.
However, please ensure you have the latest Service Pack Installed.