Belkin F5D4074 Switch User Manual


  Open as PDF
of 14
 
44 54
Overview
Installation of the Powerline AV Networking Adapter takes only
seconds and does not require setting up long wires throughout the
house. Simply plug the units directly into any available wall outlet and
connect to any device with an Ethernet port. Users have the option to
randomly change the security password for their powerline network.
Hardware Setup
1. Plugyournetworkcableintothecomputer’sRJ45networkadapter
port.
2. PlugtheotherendofyournetworkcableintotheRJ45port
located at the back of the Adapter.
3. Plugthepowercableorwalladapterintothepowerconnectorat
the back of the Adapter.
4. Insert the power plug of your power cable or wall adapter directly
into a power outlet in the wall.
NOTE: Do not plug the device into a UPS or power strip with surge protection.
The Adapter has its own power filter for protection against surges.
5. RepeatthisprocessforthesecondAdapter
Installing and Setting Up the Adapters
 previous next