Filter
Top Products
6
Surf Powerline Networking Adapter
SECTIONSTable of Contents 1 3
INSTALLING AND SETTING UP THE ADAPTERS
2
Overview
Installation of the Surf Powerline Networking Adapter takes only
seconds and does not require setting up long wires throughout the
house. Simply plug the units directly into any available wall outlet and
connect to any device with an Ethernet port. Users have the option to
randomly change the security password for their powerline network.
Hardware Setup
1. Plug your network cable into the device’s RJ45 network
adapter port.
2. Plug the other end of your network cable into the RJ45 port located
at the back of the Adapter.
3. Plug the power cable or wall adapter into the power connector at
the back of the Adapter.
4. Insert the power plug of your power cable or wall adapter directly
into a power outlet in the wall.
NOTE: Do not plug the device into a UPS or power s
trip
with
surge protection as they may filter the powerline signal.
5. Repeat this process for the second Adapter.