Filter
Top Products
5
Share Powerline AV 3 Port
SECTIONS
Table of Contents
1 3 4
INSTALLING AND SETTING UP THE ADAPTERS
2
Overview
Installation of the Share Powerline AV 3 Port takes only seconds and
does not require setting up long wires throughout the house. Simply
plug the units directly into any available wall outlet and connect to any
device with an Ethernet port. Users have the option to randomly change
the security password for their Share powerline network.
Hardware Setup
1. Plug your network cable into the device’s RJ45 Ethernet network
adapter port.
2. Plug the other end of your network cable into the RJ45 Ethernet
port located at the back of the Adapter.
3. Insert the Adapter directly into a power outlet in the wall.
NOTE: Do not plug the device into a UPS or power strip with
surge protection as they may filter the powerline signal.
4. Repeat this process for the second Adapter.