Filter
Top Products
42
Using the Web-Based Advanced User Interface
42
section
2
1
3
4
5
6
7
8
9
10
Protected Mode Switch
Protected mode ensures proper operation of N1, draft 802.11n-
compliant devices on your wireless network when 802.11g or 802.11b
devices are present or when there is heavy 802.11g or 802.11b traffic in
the operating environment. Use protected mode if your network consists
of a mix of Belkin N1 Wireless Cards and 802.11g or 802.11b cards
on your network. If you are in an environment that includes little to no
802.11g or 802.11b wireless network traffic, you will achieve the best
N1 wireless performance with protected mode OFF. Conversely, in an
environment with HEAVY 802.11g or 802.11b traffic or interference, you
will achieve the best N1 wireless performance with protected mode ON.
This will ensure N1 wireless performance is not affected.
WMM (Wi-Fi Multimedia)
WMM based on 802.11e QoS (Quality of Service) prioritizes important
data on your network such as multimedia content and voice-over-IP
(VoIP) so it will not be interfered with by other data being sent over the
network. This feature requires other wireless devices, such as Wi-Fi
phone or wireless laptop, to support WMM for best results.
Changing the Wireless Security Settings
Your Modem Router is equipped with the latest security standard called
Wi-Fi Protected Access 2 (WPA2). It also supports the legacy security
standard called Wired Equivalent Privacy (WEP). By default, wireless
security is disabled. To enable security, you will need to determine
which standard you want to use. To access the security settings, click
“Security” on the “Wireless” tab.
The Modem Router features WPA2, which is the second generation of
the WPA-based 802.11i standard. It offers a higher level of wireless
security by combining advanced network authentication and stronger
Advanced Encryption Standard (AES) encryption methods.