Belkin F5U115-UNV Network Card User Manual


  Open as PDF
of 2
 
4. Launch the BelkinDriverSwitcher applet. Select “Load SHIM driver” if you are using
an Iomega zip or jaz drive. Select “Load SIM driver” for any other SCSI devices.
Click “Restart” .
Note:
Each time you use the Driver Switcher to change back and forth between the
SIM and SHIM driver, the previously installed driver will be moved to the trash
and replaced with the new driver.
5. When your Mac restarts your SCSI device will be enabled and should function
normally. Installation is now complete.
 previous