Filter
Top Products
Windows
®
98 2nd Edition Driver Installation
1. After plugging the ADB adapter into your PC the New
Hardware Wizard will display a screen indicating that
Windows has detected a "USB Human Interface Device".
Click "Next".
2. Leave "Search for the best driver for your device" selected.
Click "Next".
3. Remove the check marks from all boxes. Click "Next".
4. Windows will find the drivers for the "USB Human
Interface". Click "Next".
5. At this point Windows may prompt you to insert your
Windows 98 Installation CD. If so, insert the CD into your
CD-ROM drive and follow the system prompts.
6. After the Human Interface Drivers are installed, installation
of the first ADB port is complete. Click "Finish".
7. Repeat steps 1 through 6 to install the second ADB port.
8. Installation is now complete.
7
P73390-F5U118-UNV-AM-man.qxd 8/31/00 5:15 PM Page 7