Filter
Top Products
9
9
EN
Driver Installation
Installation Procedure for Windows Me
This installation procedure will install two USB 1.1 Host Controllers and one
USB 2.0 Enhanced Host Controller.
(1) Windows will detect “NEC USB Open Host Controller (E13+).” The
required driver support will be automatically installed. No user
input is required.
(2) Windows will detect “PCI Universal Serial Bus”. This is the USB
2.0 EHCI controller. The Add New Hardware Wizard window will
appear.
(3) Select “Automatic search for a better driver (recommended)”. Click
“Next”.
(4) Check the “CD-ROM Drives” box. Click “Next”.
(5) Windows will locate the driver for “Belkin USB 2.0 High speed Host
Controller” . Click “Next”.
(6) Windows will now install the USB 2.0 Enhanced Host Controller
driver. Click “Finish”.
(7) Windows will detect “NEC USB Open Host Controller (E13+)”. The
required driver support will be automatically installed. No user
input is required.
(8) After installation of the USB Host Controllers, Windows will detect
“USB Root Hub” and automatically install the required driver
support. This will repeat one more time.
Installation is now complete.