Belkin F6C325 Power Supply User Manual


 
7
Presentation (continued)
REAR PANEL
3.4 SERIAL PORT (F6C425/F6C525/F6C625 models only)
Provides both RS232 and relay signal to support NOVELL
®
, UNIX
®
,
DOS
®
, WINDOWS
®
and other operating systems.
3.5 AC INPUT POWER RECEPTACLE
3.6 BATTERY BACK-UP OUTLETS
3.7 SURGE ONLY PROTECTED OUTLET
3.8 PHONE/FAX/MODEM PROTECTION
(F6C425/F6C525/F6C625 models only)
Telephone/Fax/Modem lines are surge protected and provide complete
safety for Internet connection.
3.4 SERIAL PORT
For Shutdown
Software RS232
(F6C425, F6C525,
F6C625)
3.5 AC INPUT
POWER
RECEPTACLE
3.7 SURGE ONLY
PROTECTED OUTLET
3.8“INTERNET READY”
PHONE/FAX/MODEM
PROTECTION
(6FT. PHONE CORD INCLUDED)
(F6C425, F6C525, F6C625)
6
FRONT PANEL
3.0 REPLACE BATTERY indicator (RED-LED)
The LED illuminates when the UPS battery is no longer useful and
must be replaced. Refer servicing to qualified service personnel.
(See EcoBattery Service Program, page 13).
3.1 BACK-UP indicator (YELLOW-LED)
The LED illuminates when the UPS is supplying battery power
to the loads.
3.2 LINE NORMAL indicator (GREEN-LED)
The LED illuminates when the line input voltage is normal.
3.3 ON/OFF/TEST/ button
Press the button more than 3 seconds to turn the UPS on or off,
press the button less than 1 second to activate the UPS self-testing
or to silence the back up alarm.
3.0 REPLACE BATTERY
3.1 BACK-UP
3.2 LINE NORMAL
3.3 ON/OFF/TEST BUTTON
Presentation
3.6 TWO BATTERY
BACK-UP OUTLETS