Belkin F6H500-USB Power Supply User Manual


 
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
On/ Off button not
pushed or pushed
less than 1 second
Press the On/Off
button more than 2
second
Battery voltage
less than 10V
Recharge the UPS at
least 5 hours
LED is not lit
UPS is not on
UPS fault
Contact service
personnel
Power cord loose
Re-plug the power
cord
AC breaker is
tripped
Reset the breaker
UPS always at
battery mode
Power
disturbances have
occurred
Normal operations
Battery is not fully
charged
Recharge the UPS at
least 6 hours
UPS is overloaded
Remove
un-necessary loads
Back up time too
short
Charger fault or
other reason
Contact service
personnel
STORAGE
Storage Conditions
Store the UPS covered and upright in a cool, dry location with its
battery fully charged. Before storing, charge the UPS for at least 6
hours.
Extended Storage
During extended storage in environments where the ambient
temperature is +5
o
F to +86
o
F, charge the UPS battery every 6
months. During extended storage in environments where the
ambient temperature is +86
o
F to +113
o
F, charge the UPS battery
every 3 months.
Note:
BELKIN COMPONENTS USER LICENSE AGREEMENT
Belkin Components (Belkin”) thanks you for choosing one of our
products for your use. This User License Agreement (Agreement”)
contains the terms and conditions under which limited use of the
product is licensed to you.
PLEASE READ THIS NOTICE CAREFULLY
DO NOT OPEN THIS ENVELOPE OR USE ANY OF THE
SOFTWARE UNTIL YOU HAVE READ AND AGREED TO THIS
AGREEMENT. IF YOU OPEN THE ENVELOPE, YOU ARE
AGREEING TO THE TERMS AND CONDITIONS SET OUT IN
THIS AGREEMENT. IF YOU DO NOT ACCEPT THESE TERMS
AND CONDITIONS, YOU MUST RETURN THE ENVELOPE
UNOPENED AND WITH THE DISKS INSIDE TO THE PARTY
FROM WHOM YOU RECEIVED IT.
SCOPE OF USE: In this Agreement, software means all
machine-readable software programs and associated files in this
package,
All modified versions of and upgrades or improvements to such
programs and all copies of such programs and files. You, a single
user opening this envelope (You or our), may use the software on a
single central processing unit. You may not rent it, loan it out, or
lease it, nor use it on a multi-user system.
LICENSE: You have the non-exclusive right to use the software.
You are not permitted to copy, modify or transfer the software or
documentation. You may not compile, disassemble or otherwise
reverse engineer, break down, analyze or modify the software.
USE AND RESTRICTIONS: You are permitted to make backup
copies of all the software disks for archival purposes only. You must
reproduce the proprietary notice set forth on the disks and affix them
to all backup copies. You are not permitted to use these programs in
connection with a computer service, or to use the backup copies
other than as a replacement for the original copy.
TERM: This license is effective upon acceptance by opening this
envelope or in any other way using the enclosed software, which will
constitute your acceptance of, and agreement to, this Agreement,
and is effective until terminated. The limited license in this
Agreement will be automatically terminated if you fail to comply with
any of the Terms and conditions in this Agreement. You agree that
upon such termination you will immediately destroy all programs
and documentation, including all copies made or obtained by you.
SOFTWARE, PROGRAM, DOCUMENTATION, AND ANY
RELATED INFORMATION, GOODS OR SERVICES ARE
PROVIDED WITH NO WARRANTY OR REPRESENTATION OF
ANY KIND WHAT SO EVER. BELKIN HEREBY DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
The entire risk of the use, results and performance of the software,
program and documentation is borne by you. Should any or all of
the product, software, program, documentation, or related
information, goods or services be defective, misused, unsuitable or
cause or give rise to any harm or liability whatsoever, you, not Belkin
or its associates, dealers or agents, assume the entire liability, cost of
repair, correction or any payment or other remedy whatsoever.
Furthermore, no warranty or guarantee is made regarding the use or
results of the product, software, program, documentation, or any related
information, goods or services in terms of correctness, accuracy, reliability,
timeliness or otherwise. You use and rely on the program at your own
risk. The following is the only and exclusive warranty and remedy of any
kind: Belkin does warrant that the program disks are free from physical
defects in materials and workmanship under normal use for a period of
one (1) year from the date of purchase, as evidenced by a copy of the
sales receipt. Return the defective disk or documentation with your
receipt directly to Belkin for a replacement.
DISCLAIMER: Belkin or its associates will in no event be liable (i) in
any amount for lost profits or special, incidental, punitive or consequential
damages, or (ii) for any claim or damage of any nature, or under any
theory, whatsoever, in any amount in excess of the purchase price you
paid for the product. The warranties and remedies here set forth are
exclusive, and in lieu of all others oral or written, express or implied.
Some jurisdictions do not allow exclusion or limitation of implied warranties
or of liability for incidental damages, so the foregoing limitations or
exclusion may not apply to you. This warranty gives you specific legal
rights, which vary from jurisdiction to jurisdiction.
HOWEVER, YOU WAIVE SUCH RIGHTS, EXCEPT AS EXPRESSLY
PROVIDED UNDER THE TERMS AND CONDITIONS OF THIS
AGREEMENT, TO THE MAXIMUM EXTENT ALLOWED BY LAW.
The license is governed by the laws prevailing in the State of New York,
without regard to its conflicts of laws principles.
ACKNOWLEDGMENT:
By opening the package on which this Agreement is printed, or through
which it is visible, you acknowledge that you have read this Agreement,
understand it, and agree that this agreement is the complete and exclusive
statement of agreement between yourself and Belkin and supersedes any
prior agreements, oral or written, and any other communications relating to
the subject matter of this Agreement.
SEVERABILITY:
Any term or provision of this Agreement or any application thereof, which
may be prohibited or unenforceable by law in a particular jurisdiction, shall
be interpreted and enforced to the maximum extent allowed in such
jurisdiction (which the parties acknowledge could mean severing the
provision from this Agreement or, if allowed, enforcing it in a narrower
form), without affecting the remainder of this Agreement, or any other
application of such term or provision in such jurisdiction, or application of
such term or provision in any other jurisdiction.
SAFETY INFORMATION
CAUTION!
Internal battery voltage is 12V DC.
The unit is intended for installation in a controlled environment
(temperature controlled, indoor area free of conductive
contaminants).
All batteries used are Sealed Lead Batteries. Batteries must be
recycled.
Recycling Information
Your UPS contains a Non-spill Sealed Lead Battery. On the battery, you
will find the battery name. Please reference the chart below for recycling
information.
Battery Name Recycling Inside the
USA
Recycling
Outside the USA
BB Battery (800) 278-8599 N/A
CSB Battery (800) 738-7372 1 (817) 244-4415
VISION Battery (973) 726-5323 N/A
CONTACT US
Belkin Components, Ltd
501 West Walnut St.
Compton • CA • 90220-5221 • USA
Tel: 310.898.1100 • Fax: 310.898.1111
Belkin Components, Ltd
Unit 13 • Gatelodge Close • Round Spinney
Northampton • NN3 8RX • UK
Tel: +44 (0) 1604678300 • Fax: +44 (0) 1604678330
Belkin Components B.V.
Starparc Building
Boeing Avenue 333
1119 PH Schiphol-Rijk
The Netherlands
Tel: +31 (0) 20 654 73 00 • Fax: +31 (0) 20 654 73 49
Belkin Australia Ltd
7 Bowen Cresent
West Gosford, NSW 2250
Tel: +61 (02) 4325 4666
Fax: +61 (02) 4325 4277
Away from sunlight Away from heat Away from water