Filter
Top Products
11
Belkin Ltd.
4 Pioneer Avenue
Tuggerah NSW 2259
Australia
Tel: 02 4350 4600
Fax: 02 4350 4700
If the UPS failed to operate properly, please review the following points first.
Symptom Possible Cause Remedy
LED is flashing
and audible
alarm is heard
intermittently.
UPS is not
connected
properly to
the mains.
Connect the UPS
according to the
installation guide.
UPS is functioning
but audible alarm is
heard continuously.
Overload of
the UPS.
Verify that the load
matches the UPS
capacity stated in
the specifications.
Communication lost
between UPS and
computer.
Cable is not
properly connected.
Check if the USB
cable is firmly
connected to the
USB port of the
computer and
confirm the setting.
© 2011 Belkin International, Inc. All rights reserved. All
trade names are registered trademarks of respective
manufacturers listed.
8820-00941
Troubleshooting