Filter
Top Products
29
TROUBLESHOOTING
The Adapter does not perform or connection is slow
when computer has a built-in wired Ethernet card.
This condition occurs if your computer has an active Ethernet
card while your Adapter is also active. This happens because
Windows must now handle two active network connections.
You must disable the Ethernet card from your computer
under “Network Adapters” in the Device Manager.
What’s the difference between 802.11g and 802.11n?
Currently there are three commonly used wireless networking
standards, which transmit data at very different maximum
speeds. Each is based on the designation for certifying network
standards. The most common wireless networking standard,
802.11g, can transmit information up to 54Mbps; 802.11a
also supports up to 54Mbps, but in the 5GHz frequency;
and 802.11n specification can connect at up to 300Mbps.
See the following chart for more detailed information.