Belkin F8T001 Network Card User Manual


 
1514
HARDWARE SETUPHARDWARE SETUP
Hardware Setup for Windows 98 SE, Me, 2000, and XP
Follow these instructions to install your USB Adapter on your PC.
Note: Your USB Adapter is sensitive to static electricity, which can damage its delicate electrical components.
To protect your device, always touch the metal chassis of your computer before handing the USB Adapter.
This will ground any potential electrostatic discharge. Avoid touching the metal connector when handling the
USB Adapter. Dry weather conditions or walking across carpeted floors may cause you to acquire an
electrostatic charge.
1. Connect the USB Adapter directly to an
available USB A-type connector on your
desktop or notebook computer. Your system
should register a new USB device found.
2. Choose “Install from a list or specific
location”; then click “Next”.
3. Browse for the location of the device
driver “:\Program Files\Belkin\
Bluetooth\Software\bin\” then
click “Next”.
4. If you receive the following “Hardware
installation notice”, click on “Continue
Anyway” to continue with the
installation process.
P74408_F8T001-003_man.qxd 7/15/03 3:36 PM Page 14