Filter
Top Products
11
Installing and Setting up the Card
11
section
1
2
3
4
5
6
2.7 Now secure the Card with the screw that you previously placed
in a safe place.
2.8 Replace the computer’s cover. Plug in the external antenna cable
to the connector on the back of the Card.
2.9 Now that the Card is installed, you can reconnect the power cord
and turn the computer back on.
Step 3 Finish
Finish Installation of the Card
3.1 The Found New Hardware Wizard
will appear. (This may take 3–15
seconds.) Select “Yes, this time
only” and click “Next” to install
the hardware.
3.2 Select “Install the software
automatically” and “Next” to
install the hardware.