Filter
Top Products
II. VideoBus™ Installation
1. Make sure to close all Windows programs before installing the
VideoBus™ software.
Do not plug in the
VideoBus™ until you are prompted
by the software installation
program.
2. Open your CD-ROM drive and place the VideoBus™ CD on the
tray. Close the drive by pressing the eject button. The following
screen will come up automatically. If you want to cancel the
installation, press the Escape key.
If it does not come up, click on the Start button found on the
bottom left corner of your screen. Scroll up and click on Run. In
the Run window, type d:\setup.exe and then click OK, where d: is
the drive letter of your CD-ROM drive.
3. Click on the Belkin VideoBus™ button to install the drivers.
10. After you return to the installation, you will be prompted to finish
the installation. Click Finish.
11. After installing the VideoBus™ drivers, the setup program will
install a program group in your Start menu:
4
9