Filter
Top Products
2
Connecting Your Keyboard
Your keyboard connects to either a PS/2 (or 6 pin MiniDIN)
keyboard port or an AT (5pin DIN) keyboard port. To verify,
look in the back of your computer for the port that is
designated for your keyboard. Most PCs will have the word
KEYBOARD marked next to the keyboard port. If you are
still unsure, please refer to your hardware manual.
For PS/2 keyboard installation, simply remove the AT adapter
before connecting the keyboard cable to the computer.
WARNING:To avoid damage, turn your computer off before
plugging or unplugging any pointing devices.
• Locate the computer PS/2 keyboard port or AT port on
the back of your computer.
• Plug your keyboard into the appropriate port suggested
above. Check the box in which your keyboard was
shipped to verify the ports supported.
• Turn your computer on. At this point, your keyboard
should be recognized by the Microsoft
®
Operating
System. If your keyboard does not respond, please
contact the Belkin Technical Support department at
(800) 223-5546 ext. 2263.