Filter
Top Products
6
Hardware Installation
(1) POWER OFF THE COMPUTER AND DISCONNECT THE
POWER CORD.
(2) Remove the screws that secure the computer cover and
remove the cover.
(3) Touch any part of the metal case to ground yourself. This
will discharge any static electricity that could damage your
PCI card or computer.
(4) Locate an empty PCI expansion slot
(5) Remove the port cover from the back of the PC that
corresponds to the PCI slot you selected. If the port cover
is secured with a screw, remove the screw and place it in a
safe spot. You will need to reuse the screw to install the
PCI card.
(6) Insert the PCI Card into the slot. Apply pressure as
needed until the Card is fully seated.
(7) Now secure the PCI Card with the screw that you removed
in step #5.
(8) Replace the computers cover.
(9) Replace your computer power cable and insert the Belkin
USB 2.0 driver installation CD into your computers CD-
ROM drive.
(10) Turn on power and start the Windows operating system.
P73768-A-F5U220-man.qxd 12/21/01 5:03 PM Page 6