Filter
Top Products
Installation (continued)
8
Installation Procedure for Windows 2000 OS
This installation procedure will successfully install two
USB OHCI host controllers and a single USB 2.0
enhanced host controller.
1. Locate an available PCI slot on your computer.
2. Insert the PCI Card into the slot. Apply pressure as
needed until it is fully seated.
3. Insert the Belkin USB 2.0 driver installation CD into
your computer’s CD-ROM drive.
4. After installing the PCI Card, turn on the computer.
5. After loading, the Windows 2000 OS will detect
“NEC PCI to USB Open Host Controller”. The
required driver support will be automatically
installed. No user input is required. This will repeat
one more time.
6. The Windows OS will detect “Universal Serial Bus
(USB) Controller”. This is the USB 2.0 EHCI host
controller. The “Found New Hardware Wizard”
window will appear. Select “Search for a suitable
driver for my device (recommended)” and
click “Next”.