Filter
Top Products
1
___
2
___
3
___
4
___
5
___
6
___
7
10
• Make sure you have properly established
communication/ synchronization between
the receiver and the Mouse and Keyboard.
• If the Mouse is not working, make sure that the
LED on the Mouse starts flashing when you push
any of the Mouse buttons, or move the Mouse.
If the LED does not flash, check to make sure
you have installed the batteries correctly.
• When the Mouse LED is flashing, the LED
on the receiver should also flash to indicate
they are speaking to each other. If the LED on
the receiver does not flash, it means that the
devices have not connected properly. Repeat
step 4 to 7 of the quick installation guide.
• If your Mouse pointer becomes choppy on-
screen or the Keyboard does not register
keystrokes, replace batteries with a fresh set.
• If your Cursor is controlled by another system
in an office or multi-user environment,
try to unload the batteries, insert them
again after 2 minutes and repeat step 3 to
step 7 of the quick installation guide.
Troubleshooting
5