Belkin PM01629 Surge Protector User Manual


  Open as PDF
of 4
 
Step 6:
Firmly press and release the “|” button to turn ON
the “Remote Switched” outlets.
Checktoseeifagreenlightflashesontheremoteswitch.Thiswill
indicatethattheremoteisworking.
HOW TO USE THE
CONSERVE REMOTE SWITCH
Step 9:
When your equipment is off, firmly press and
release the “O” button on the remote switch.
Checktoseeifagreenlightflashesontheremoteswitch.Thiswill
indicatethatyouhaveeliminatedstandbypowertoConserve’s
“RemoteSwitched”outlets.Devicespluggedintothe“AlwaysOn”
outletswillremainpowered.
Step 7:
Your equipment is now powered,
surge-protected, and ready for use.
Step 8:
When finished using your equipment, turn off
each device as you normally would.
Step 10:
When ready to use your equipment again, firmly
press and release the “|” button on the remote
switch to activate the power to the “Remote
Switched” outlets.
Step 11:
Turn on and use your equipment as normal.
Repeat Step 8 when done.
For complete instructions, see the User Guide
enclosed or visit www.belkin.com/conserve.
6
9
I = ON
I = ON
O = OFF
O = OFF
 previous