Belkin PM11-EL/RAMA Computer Hardware User Manual


 
71
3
Award BIOS Setup Utility
Super IO Device
Move the cursor to this field and press <Enter>. The following fields
will appear.
Onboard FDC Controller
Enabled Enables the onboard floppy disk controller.
Disabled Disables the onboard floppy disk controller.
Onboard Serial Port 1 and Onboard Serial Port 2
Auto The system will automatically select an I/O address
for the onboard serial port 1 and serial port 2.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to
manually select an I/O address for the onboard
serial port 1 and serial port 2.
Disabled Disables the onboard serial port 1 and/or serial
port 2.
SC Port Address/IRQ (PM11-UL/RAMA only)
This field is used to select the SC ports address and IRQ. When
selecting an address for the SC port, the IRQ will at the same
time appear next to the address selected.
MS Port Address/IRQ (PM11-UL/RAMA only)
This field is used to select the MS ports address and IRQ. When
selecting an address for the MS port, the IRQ will at the same
time appear next to the address selected.
SD Port Address/IRQ (PM11-UL/RAMA only)
This field is used to select the SD ports address and IRQ. When
selecting an address for the SD port, the IRQ will at the same
time appear next to the address selected.
Important:
IRQs for Serial Port 1, Serial Port 2, Parallel Port, SC Port, MS
Port and SD Port must be appropriately selected making
sure each port uses a different IRQ. When selecting a port
address for SC Port, MS Port and SD Port, the IRQ will at the
same time appear next to the address selected. For
example, if you selected 700/3 for the SC port, 700 is
the ports address and 3 is its IRQ. Therefore you must
not select IRQ 3 for the other ports.