Filter
Top Products
BenQ LCD Color Monitor User's Guide
English 36
D. Picture Optimization
The easiest way to obtain an optimal display is to use the ikey function. Press the “ikey” on the con-
trol panel and the monitor will adjust automatically.
If you are still not satisfied with the result, you can still adjust the image manually.
1. Run the test program auto.exe from CD-ROM, this is the best way to observe possible
changes. You can also use any other image, such as the desktop of your operating system. But
we recommend you to use auto.exe. As you run auto.exe, a test pattern emerges.
2. Press “Enter” on control panel to access OSD.
3. If there are vertical noises observed, press “<” or “>” key to select “FINE TUNE” and press
“Enter” key. Then press ”<” or “>” key to select “CLOCK” and also press “Enter” key
again. Now, press “<” or “>” to adjust the monitor till the noises disappear.
4. If there are horizontal noises observed, press “<” or “>” key to select “FINE TUNE” and
press “Enter” key. Then press ”<” or “>” key to select “PHASE” and also press “Enter” key
again. Now, press “<” or “>” to adjust the monitor till the noises disappear.
To m a ke s ur e t h e “iKey” function performs well, you have to use one of the supported modes. If
the ikey does not work properly and the “NON PRESET MODE” message is on the OSD, it
means you do not use one of the supported modes. Please set your computer to use one of the
supported modes. You may find the list of supported modes in this manual.