Filter
Top Products
25 How to adjust your monitor
Senseye Demo Displays the preview of
screen images under the
selected mode from
Picture Mode. The screen
will be divided into two
windows; the left window
demonstrates images of
Standard mode, while the
right window presents the
images under the specified
mode.
Press the
W or X keys to
change the settings.
• ON
• OFF
Display Mode This feature is provided to
allow aspect ratio’s other
than 16:10 to be displayed
without geometric
distortion.
• Overscan -Slightly
enlarges the input image.
Use this feature to hide
annoying edge noise if
present around your
image.
• Full - Scales the input
image to fill the screen.
Ideal for 16:10 aspect
images.
• Aspect - The input image
is displayed without geo-
metric distortion filling
as much of the display as
possible. 16:9 images will
fill the screen horizon-
tally while 4:3 images
will fill the screen verti-
cally.
• 1:1- Displays the input
image in its native
resolution without scal-
ing.
When the resolution is
set at 1920 x 1080 in
1:1 mode, some slight
noise may be noticed on
the non-active area.
Press the W or X keys to
change the settings.
The options under
Display Mode will be
different depending on
the input signal
sources.
When the signal
source is from a
DVI or D-sub
source, and the
input image is of
non-wide aspect
ratio:
• Full
• Aspect
• 1:1
Or
When the signal
source is from a
HDMI source:
• Overscan
• Full
• Aspect
• 1:1
AMA Improves the gray level
response time of the LCD
panel.
Press the
W or X keys to
change the settings.
• ON
• OFF