Filter
Top Products
Operation 43
Function Description
Splash
Screen
Allows you to select which logo screen will display during projector
start-up.
Auto Blank
See "Hiding the image" on page 31 for details.
Quick
Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 30 seconds.
High
Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 31 for details.
Audio
Settings
Mute
Volume
Power On/Off Ring Tone
See "Adjusting the sound" on page 32 for details.
Lamp
Settings
Lamp Mode
See "Setting Lamp Mode as Economic or SmartEco" on page 46 for
details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 50 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 46 for details on how the
total lamp hour is calculated.
Security
Settings
Change Password
You will be asked to enter the current password before changing to a
new one. See "Utilizing the password function" on page 21 for details.
Change Security Settings
Power On Lock
See "Utilizing the password function" on page 21 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
See "Using the test pattern" on page 33 for details.
4. SYSTEM
SETUP: Basic
5. SYSTEM SETUP: Advanced menu