BenQ MX511 Projector User Manual


 
Introduction10
Controls and functions
Projector
6. Mode/Enter
Selects an available picture setup mode.
See "Selecting a picture mode" on page 34
for details.
Activates the selected On-Screen Display
(OSD) menu item. See "Using the menus"
on page 27 for details.
7. Source
Displays the source selection bar. See
"Switching input signal" on page 31 for
details.
8. Power/POWER indicator light
Toggles the projector between standby
mode and on.See "Starting up the
projector" on page 24 and "Shutting down
the projector" on page 42 for details.
Lights up or flashes when the projector is
under operation. See "Indicators" on page
61 for detail.
9. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 61 for details.
10. Right/Auto
When the On-Screen Display (OSD)
menu is activated, the #4, #5, and #10 keys
are used as directional arrows to select the
desired menu items and to make
adjustments. See "Using the menus" on
page 27 for details.
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 25 for
details.
11. Menu/Exit
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
1. Focus ring
Adjusts the focus of the projected image.
See "Fine-tuning the image size and clarity"
on page 26 for details.
2. Zoom ring
Adjusts the size of the image. See "Fine-
tuning the image size and clarity" on page
26 for details.
3. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 61 for
details.
4. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 26 for
details.
5. Left/Blank
Used to hide the screen picture. See "Hiding
the image" on page 39 for details.
1
3
4
10
2
9
11
8
6
7
4
5
I
I